DUELEGS BBF Group
TECNOLOGY
LONATI GROUP'S
TECNOLOGY
To Gambetti, Technology means investing in the future.
BBF GAMBETTI has always considered it indispensable to invest in the purchase of state-of –the-art machines. This allows the company to produce new articles easily, thanks to new technology.
Thanks to our extensive processing capacity, Gambetti is able to realize high production volumes in short times and to monitor the optimization of the machines themselves, thus constantly controlling costs.
The machines currently used
in the production plant are highly sophisticated.
One of Gambetti Group's machine departments.
• Diameter:4"
• Needles 7mm:From 200 to 434
• Feeds:4
• Needle/needle Selection points: 2 (HF 2.7)
• Electronic feeders : 8 for feed
• Max mech. speed: 750 rpm.
• Diameter:4"
• Needles 7mm:From 340 to 434
• Feeds:4
• Needle/needle Selection points: 6
• Electronic feeders : 36Max mech.
• Speed: 750 rpm.
• Diameter:4"
• Needles 7mm:From 100 to 280
• Feeds:4
• Needle/needle Selection points:2 (HF 2.7)
• Electronic feeders : 8 for feed
• Max mech. speed: 750 rpm.
MATEC HF MATEC MATEC HF
VM 4.7 PRESTIGE VM 4.7 baby
Electropneumatic single cylinder machine with 4 feeds plus 2 needle-needle selection drums on each feed (one in tucking position and one in clearing position, 8 in total) for the production of pantyhose and knee-high socks in baguette pattern, tuck, jacquard, laid-in piquet effect. 5 yarnfingers with dual pneumatic control for each feed, 1 motorized plating yarnfinger with pneumatic control for angular movement and 2 pneumatic controls to set height and depth. Stitch cams motorized for gradual or partial stitch narrowing or widening in any part of the sock. Pantyhose and knee high option with movable stitch cams with 2 colors each course, cut-boss (jacquard relief), single or double dial jacks. Electronic device to maintain the size at any temperature of the machine.
LONATI LB 08MJ
#NEWS
GUARANTEED Quality!
Gambetti Group pays close attention so that its suppliers substantiate the obtained certification.
Oeko-Tex® Standard 100
It is a unified control and certification system for all the textile world, from raw material, to semifinished products, to end products throughout all the processing phases. Controls on noxious substances include: substances which are regulated and prohibited by law, chemical products known to be health hazards and parameters to safeguard health. Manufacturers can chose whether to label the successfully analysed products, or group of articles, with Oeko-Tex® mark, or to promote them in other ways, provided that it has been proved, through complete laboratory tests, that all the components and accessories meet, without exception, the required control criteria. The issued certificate is valid for a year and can be renewed each time it is required.
